Structure and properties of soda lime silicate glass doped with rare earth

Soda-lime-silicate glasses doped with different rare-earth oxides (La₂O₃, CeO₂, Nd₂O₃, Gd₂O₃ and Y₂O₃) of 1 mol% content were prepared with the traditional melting-quenching methods. In order to reveal the effects of rare-earth elements on the behavior of soda-lime-silicate glass, the structure of soda-lime-silicate glasses doped with different rare-earth oxides were determined with Fourier transform infrared spectrometer using the KBr method, and viscosity of glass melts were measured by the rotating crucible viscometer, the melting temperature of the studied glasses were derived on the basis of Arrhenius Equation, moreover the density, bending strength and molar volume were measured and calculated. The effect of rare-earth dopants on the structure of soda-lime-silicate was analyzed by a shift of peak position and variation in the full-width at half-maximum. The effect of doping rare-earth oxides into glass on the viscosity, density and bending strength was interpreted by changing in structure of soda-lime-silicate glasses doped with rare-earth oxides.     

High coercive Nd-Fe-B magnets fabricated via two-step sintering

The fabrication of Nd₁₁Dy₄Fe_76.5TM_2.5B₆ (TM=Co, Cu, Al, and Nb: at%) sintered magnets via a two-step sintering process was demonstrated. A densification of greater than 99% was achieved using the two-step sintering of the Nd-Fe-B powder. This process produced a sample with an average grain size of 6.2 μm in the Nd₂Fe₁₄B phase, resulting in an enhancement of the coercivity compared to that of the isothermally sintered sample. The suppression of grain growth was considered to be affected by the relatively low temperature during the two-step sintering and by the presence of a B-rich phase at the triple junction. Consequently, the two-step sintering process led to suppression of grain growth and a uniform grain size distribution, which resulted in improved magnetic properties, in particular in the intrinsic coercivity.     

发光二极管用SrWO4:Eu3+红光荧光粉激发谱强度的调控

采用化学共沉淀法制备了Eu³⁺掺杂摩尔分数不同、煅烧温度不同的SrWO₄:Eu³⁺系列发光粉体, 所制备的粉体均具有Eu³⁺特征的强室温红光荧光发射. 通过调节煅烧温度和掺杂摩尔分数来调控近紫外和蓝光吸收强度, 进而调控用395 nm的近紫外光和465 nm的蓝光激发样品所得红光发光强度. 研究结果表明, 所制备的SrWO₄:Eu³⁺红光荧光粉可以被紫外和蓝光发光二极管有效激 关键词： 稀土掺杂 4:Eu³⁺')" href="#">SrWO₄:Eu³⁺ 光致发光 白光发光二极管     

Software package SIMPRE—Revisited

This article elucidates the pitfalls identified in the software package SIMPRE recently developed by Baldoví et al. (J. Comput. Chem. 2013, 34, 1961) for modeling the spectroscopic and magnetic properties of single ion magnets as well as single‐molecule magnets. Analysis of the methodology used therein reveals that the crystal field parameters (CFPs), expressed nominally in the Stevens formalism, exhibit features characteristic for the CFPs expressed in the Wybourne notation. The resemblance of the two types of CFPs introduces a serious confusion that may lead to wrong comparisons of the CFPs taken from various sources. To clarify this confusion, the properties of the CFPs ( , ) associated with the Stevens operators ( X = S , J , or L ), which belong to the class of the tesseral‐tensor operators, are contrasted with those of the CFPs B_kq associated with the Wybourne operators , which belong to the class of the spherical‐tensor operators. Importantly, the confused properties of Stevens and Wybourne operators may bear on reliability of SIMPRE calculations. To consider this question independent calculations are carried out using the complete approach and compared with those of the restricted approach utilized earlier. It appears that the numerical results of the package SIMPRE are formally acceptable, however, the meaning of the CFPs must be properly reformulated. Several other conceptual problems arising from misinterpretations of the crucial notions and the CFP notations identified therein are also discussed and clarified. © 2014 Wiley Periodicals, Inc.     

荧光材料GdOCl∶Er~(3+),Yb~(3+)的深红-近红外发光研究

采用高温固相合成法制备了Er3+,Yb3+双掺杂的GdOCl荧光材料,并研究其荧光性能。该双掺杂体系荧光粉吸收紫外光,发出红色(619 nm)和近红外(~979 nm)荧光。在这些荧光材料中,1个Er3+离子可以有效将其能量转移给2个Yb3+离子。通过改变Yb3+掺杂浓度,对比Gd0.998 5-yOCl∶0.0015Er3+,yYb3+中的Er3+的发射光谱和不同检测波长的荧光寿命变化特点,对Er3+-Yb3+发生量子剪裁的能级进行分析和指认,并计算了能量转化效率(η)和量子效率(Q)。正是由于具备这种荧光性能,该荧光材料体系有望在荧光太阳能收集器以及军事和医学的红外显示和探测技术中获得应用。     

稀土元素取代对Ti_(0.26)Zr_(0.07)V_(0.24)Mn_(0.1)Ni_(0.33)贮氢合金结构和电化学性能的影响

研究了5种稀土元素部分取代V对Ti0.26Zr0.07V0..24Mn0.1Ni0.33合金的微观结构和电化学性能的影响。结果表明,Ti0.26Zr0.07V0.24Mn0.1Ni0.33和Ti0.26Zr0.07V0.24-xMn0.1Ni0.33REx(x=0.005;RE=La,Ce,Nd,Ho,Y)均由体心立方结构的钒基固溶体相和六方结构的C14 Laves相组成。在合金中加入稀土元素,会使合金中两相的晶胞体积同时增大。稀土元素部分取代V均改善了合金电极的活化性能。La和Nd元素取代后,合金电极的最大放电容量明显增加,而Ce的取代提高了合金电极的循环稳定性。Ce,Nd,Ho,Y均改善了合金电极的倍率放电性能。合金电极在高温状态下表现出了良好的放电性能,其中Nd在333 K时放电容量可达550.4 mAh·g-1。稀土元素对荷电保持率的影响各异。     

5-甲基苯并三唑-1-乙酸铕三元配合物的合成及表征

以5-甲基-苯并三唑-1-乙酸和1,10-邻菲啰啉为配体,采用溶液法合成了一种铕配合物。通过元素分析、配位滴定、摩尔电导率、红外光谱和紫外光谱对其进行表征。其组成可能为Eu(L)3phen·3.5H2O(HL=5-甲基-苯并三唑-1-乙酸,5-mbtaa;phen=1,10-邻菲啰啉)。使用热分析和荧光光谱研究了配合物的性质。热分析结果显示:铕配合物具有较好的热稳定性。荧光光谱显示:该配合物发出Eu(Ⅲ)特征荧光,并且5-甲基-苯并三唑-1-乙酸是较好的敏化剂。     

火焰原子吸收法测定中药土大黄中四种微量元素的含量

目的运用火焰原子吸收光谱法测定中药土大黄根中的Fe、Zn、Mg、Ca等4种金属元素的含量。方法用浓HNO3-HClO4消解样品,采用标准曲线法测定其4种金属元素含量。结果所测的样品中含有丰富的人体必需微量元素,尤其是Ca含量极高。方法回收率在96．90％～102．3％之间,样品相对偏差小于5％。结论方法简单、准确,结果令人满意。     

长江下游下蜀黄土的稀土元素物源判别

通过对长江下游镇江、福家湾、新港、芜湖、福路镇等地区下蜀黄土中稀土元素的研究,结合长江古漫滩堆积物及北方黄土沉积物,对下蜀黄土进行了物源判别,得出：下蜀黄土与长江河漫滩之间的各稀土元素的 DF 值绝大部分小于0．2,表现出在各个稀土元素上与河漫滩的接近程度较大,而与北方黄土接近程度较小;由物源指数 PI 计算得出,新港、福路镇、镇江下蜀黄土 PI 值均在0．2附近,表现出下蜀黄土与河漫滩在稀土元素总体上的相似程度极高,物源判别为长江河漫滩;福家湾下蜀黄土物源判别为北方黄土,北方黄土对其有一定影响。总体上,长江下游下蜀黄土受到北方黄土与河漫滩的影响,其中以长江河漫滩影响为主。     

火焰原子吸收法测定中药草珊瑚叶中五种金属元素的含量

目的运用火焰原子吸收光谱法测定中药草珊瑚叶中的Fe、Zn、Mg、Ca、Cu 5种金属元素的含量。方法用浓HNO3-HCl O4消解样品,采用标准曲线法测定其5种金属元素含量。结果所测的样品中含有丰富的人体必需微量元素。方法回收率在99.35%-103.30%之间,样品相对偏差小于5%。结论该法简单、准确,结果令人满意。